The drive shaft of the scraper of the paver drives the large chain of the scraper to transport the materials in the hopper.

 

Common fault of scraper chain: chain A is too loose and collides with asphalt mixture. B The asphalt mixture is mixed with rebar and other sundries, and the chain is blocked so that the scraper cannot rotate. C The connecting bolts of the paver bottom plate are loose or the bottom plate is cracked and warped, which will block the scraper feeder. D The right scraper chain is broken. E The front and rear bearings of the scraper chain are damaged. Generally, the oil seal and dust seal sleeve outside the bearing are damaged. After the asphalt mixture enters, the scraper gets stuck or the resistance is too large, resulting in bearing damage. The transmission chain is made of high-quality alloy steel.

 

Disclaimer Part of the content comes from the network! This article is only for exchange and learning. The copyright belongs to the original author. Some pictures and content cannot be contacted with the original author in time when they are pushed. If the source label is wrong or your rights and interests are infringed, please inform us and we will delete them immediately

 

Enterprise introduction

 

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies paver wearing parts, paver balance beam, auger shaft, pedal, feeding base plate, blade, screed, reducer, chain rail, track shoe, roller, scraper chain, feeding chain, etc.

 

Contact: Manager Liang

 

Contact: 13645201509

 

(WeChat same number)

 

QQ：2870202745