徐工RP951沥青摊铺机配件及维修

沃尔沃6820摊铺机分料马达4617500032#4617500035

文章出处:工程机械之家http://www.700618.com/人气: 发表时间:2022-12-19 10:21:37

液压泵的工作原理:运动带来泵腔容积的变化,从而压缩流体使流体具有压力能,必须具备的条件就是泵腔有密封容积变化

液压泵是为液压传动提供加压液体的一种液压元件,是泵的一种。它的功能是把动力机(如电动机和内燃机等)的机械能转换成液体的压力能。单柱塞泵的工作原理是凸轮由电动机带动旋转,当凸轮推动柱塞向上运动时,柱塞和缸体形成的密封体积减小,油液从密封体积中挤出,经单向阀排到需要的地方去。当凸轮旋转至曲线的下降 部位时,弹簧迫使柱塞向 下,形成一定真空度,油 箱中的油液在大气压力的 作用下进入密封容积。凸轮使柱塞不断地升降,密封容积周期性地减小和增 大,泵就不断吸油和排油。

免责声明丨 部分内容来源网络!本文仅供交流学习 , 版权归属原作者,部分图片、内容推送时未能及时与原作者取得联系,若来源标注错误或侵犯到您的权益烦请告知,我们将立即删除.

 

 

企业介绍

公司供应摊铺机配件,压路机配件,铣刨机配件,摊铺机刮板驱动轴,刮板驱动轴总成,找平仪,找平仪支架以及液压泵和配件。我厂还供应摊铺机易损件,摊铺机平衡梁,搅龙轴,踏板,输料底板,叶片,熨平板,减速机,链轨,履带板,支重轮,刮板大链条,输料链条等。

 

联系人:梁经理

联系方式:13645201509

(微信同号)

QQ:2870202745

Hydraulic pump is a kind of hydraulic component that provides pressurized liquid for hydraulic transmission. Its function is to convert the mechanical energy of power machine (such as motor and internal combustion engine) into the pressure energy of liquid. The working principle of the single plunger pump is that the cam is driven by the motor to rotate. When the cam pushes the plunger upward, the sealing volume formed by the plunger and the cylinder block decreases, and the oil is squeezed out of the sealing volume and discharged to the required place through the one-way valve. When the cam rotates to the lower part of the curve, the spring forces the plunger downward to form a certain vacuum, and the oil in the tank enters the sealing volume under the action of atmospheric pressure. The cam makes the plunger continuously rise and fall, the sealing volume decreases and increases periodically, and the pump continuously absorbs and discharges oil.
 
Disclaimer Part of the content comes from the network! This article is only for exchange and learning. The copyright belongs to the original author. Some pictures and content cannot be contacted with the original author in time when they are pushed. If the source label is wrong or your rights and interests are infringed, please inform us and we will delete them immediately
 
Enterprise introduction
 
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies paver wearing parts, paver balance beam, auger shaft, pedal, feeding base plate, blade, screed, reducer, chain rail, track shoe, roller, scraper chain, feeding chain, etc.
 
Contact: Manager Liang
Contact: 13,645,201,509
(WeChat same number)
QQ:2870202745

推荐产品
$Pros$